All manuals and user guides at all-guides.com
Fax +1 305 430 9692
#
THE TARE FUNCTION
The tare function is extremely useful to calculate the weight of ingredients
that cannot be put directly on the platform. For example flour, or liquids,
which require a container before weighing.
In order to use this function, place the empty container on the scale, and
then press the "On/Tare" touchpad under the LCD display. The scale will
switch on and indicate 0g or 0.00 oz. Add the ingredient to weigh. The
weight indicated on the display is the weight of the ingredient added inside
the container!
Note: When you remove the container from the platform, the LCD display
will show the weight as negative (" – " will appear on the left-hand side). To
reset, press "On/Tare" again.
ERROR INDICATION
If the display shows symbols randomly or if the scale doesn't turn off
automatically, it means that your scale has a problem (wrong initialization
or weighing error).
Remove any object from the scale and wait for it to turn off.
Then start again.
If the problem goes on, remove the batteries for 10 seconds, and then put
them back in place.
OVERLOADING INDICATOR
If the "EEEE" symbol appears on the LCD screen, it means that the
maximum weight accepted by your scale is exceeded, please remove the
object from the glass plate in order not to damage your scale.
LOW BATTERY INDICATOR
If the "LO" symbol is displayed on the LCD screen, it means that the
batteries of your scale are low and should be replaced soon. Please
dispose of the old batteries in an environmentally friendly way.
Copies of the I/B. Please reproduce them without any
changes
except
under
special instruction
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
4
Assembly page 4/20
from Team
Print only
USK EBS 33086 - 111026