Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Fax +1 305 430 9692
#
CHARACTERISTICS OF YOUR SCALE
·
Bamboo wood platform
·
Automatic switch-off
·
Large LCD display
·
Two weight unit systems: convertible g / lb. + oz. (1 ounce = 28.35 g)
·
Maximum weight (for normal weighing) = 5000 g / 11 lb.
·
Precision of the measurement = 1 g / 0.1 oz
·
Low battery indicator and overloading indicator
BEFORE THE FIRST USE
This appliance works with 1 lithium battery (3 V, type CR2032, included). If
battery is not pre-installed, remove the lid of the battery housing on the rear
part of the scale. Place the battery, the positive pole facing outwards, and
then put back the lid. You can now use your scale.
WEIGHT UNIT
Your scale allows you to use the metric measurement system (grams) OR
the imperial system (ounce). Choose the measurement system at any time
by pressing the "Mode" touchpad (oz...g), depending on the measurement
system you wish to use. This button is situated under the LCD display.
USE
Put the scale on an even and hard surface, for instance a table or
countertop. Avoid soft surfaces.
WEIGHING
1) Slide the retractable LCD panel out
2) Switch scale on using the on/off switch situated on the underside of
the scale. LCD screen will initialize and indicate "HELO"
3) The scale will turn on and the LCD display will show "0 g" or "0.0 oz."
or 0 lb. 0.0 Oz."
4) Put the object you want to weigh on the bamboo plate. The
stabilized weight is displayed.
5) Remove the object from the platform.
6) The scale turns off automatically after 60 seconds. You can also
switch the scale off anytime by using the on/off switch.
7) If scale goes off automatically, press on the ON/TARE touchpad to
switch on again.
Copies of the I/B. Please reproduce them without any
changes
except
under
special instruction
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
3
Assembly page 3/20
from Team
Print only
USK EBS 33086 - 111026
Publicité
