Velleman VTTEST23 Mode D'emploi page 8

Warning: This device was designed in accordance with EN 61010-1
pollution degree 2. This implies that certain restrictions in use apply that
are related to pollution which can occur within the environment of use. Refer
to the table above.
This device is only suitable for measurements in Pollution
degree class 2 environments.
8. Specifications
This device is not calibrated when purchased!
Regulations concerning environment of use:
Use this meter only for measurements in CAT I, CAT II and CAT III
environments (see §7).
Use this meter only in a pollution degree 2 environment (see §8).
AC voltage measurements
Safety standard
Safety rating
Voltage tester type
Alarm sound type
IP rating
Number of poles
Mains plug type
Altitude
Temperature
Mains supply voltage
fluctuations
Weight unit
Height unit
Width unit
Depth unit
9. Operation
Performing Tests and Measurements
The socket voltage tester is designed to assist users in determining the
presence and level of electrical voltage in standard wall outlets and sockets.
This essential tool is intended for both professional electricians and
homeowners to ensure the safety and functionality of electrical circuits and
outlets.
V. 01 – 29/09/2023
VTTEST23
230 V – 50Hz – 11mA
EN 61010
CAT II / 230 V
AC
Buzzer, Optical
IP30
3
Type F (Germany - Schuko)
Max. 2000m
Max. 40°C
± 10%
60 g
68 mm
60 mm
56 mm
8 ©Velleman Group nv