Velleman VTTEST23 Mode D'emploi page 5

All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not
covered by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorized way will void the warranty. Damage caused by
disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
4. Maintenance
There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
Do not apply abrasives or solvents to the meter. Use a damp cloth and mild
detergent for cleaning purposes.
5. During Use
Risk of electric shock during operation. Be very careful when
measuring live circuits.
•
Read, understand and follow the Safety Rules and operating
instructions in this manual before using this instrument.
•
The Voltage Tester is designed to be used by the skilled persons
and in accordance with safe methods of work.
•
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
•
Unauthorized persons are not to be allowed to disassemble the
tester.
•
Keep fingers away from the metal probe tips when taking
measurements.
•
Comply with all safety codes. Use approved personal protective
equipment when working near live electrical circuits.
•
Use caution on live circuits. Voltages above 30V AC RMS, 42V AC
peak, or 60V DC pose a shock hazard.
•
Do not use the tester in wet or damp environments or during
electrical storms.
•
Do not use the tester near explosive vapors, dust or gasses.
•
Do not use the tester if it operates incorrectly. Protection may be
compromised.
•
Do not apply voltage that exceeds the tester's maximum rated
input limits.
V. 01 – 29/09/2023
VTTEST23
5 ©Velleman Group nv