PRODUCT IDENTIFICATION
Hot Air Outlet
(Front)
Figure 1 - 35,000 BTU/Hr Model
UNPACKING
1. Remove all packing items applied to
heater for shipment. Keep plastic cover
caps (attached to inlet connector and
hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
103907
All manuals and user guides at all-guides.com
Heater Base
Piezo Ignitor
Button
Automatic Control
Valve Button
Hose /Regulator
Assembly
THEORY OF OPERATION
The Fuel System: The hose/regulator
assembly attaches to the propane gas sup-
ply. This provides fuel to the heater.
The Air System: The motor turns the fan.
The fan pushes air into and around the
combustion chamber. This air is heated and
provides a stream of clean, hot air.
OWNER'S MANUAL
Shell
Handle
Fan Guard
Inlet
Connector
The Ignition System: The piezo ignitor
lights the burner.
The Automatic Control System: This
system causes the heater to shut down if the
flame goes out.
3
Motor
Power
Cord