Uline METRO Serie Instructions De Montage page 4

4. Place tabletops over assembled frame. Align
pre-drilled holes in tabletop with holes on support
bars. Attach using 18 M6 x 55 mm bolts (B).
(See Figure 9)
NOTE: Quantity of bolts will increase for
192 x 48" table.
Figure 9
PAGE 4 OF 15
ASSEMBLY CONTINUED
B
5. Attach brackets (E) to underside of tabletops on the
outside of center leg frames using eight M6 x 15 mm
bolts (D) per bracket. Repeat for opposite side of
table. (See Figure 10)
NOTE: Quantity of brackets and bolts will
increase for 192 x 48" table.
NOTE: For powered tables, proceed to
Power Center Installation on page 5.
Figure 10
E
D
0123 IH-10276