Publicité
Les langues disponibles
Les langues disponibles
Step 1
Charging the tablet
The tablet has a built-in rechargeable battery. Charge the device when the battery level is
low.
1. Connect the power cable into the power adapter.
2. Connect the p ower a dapter t o an electrical o utlet a nd charge t he t ablet un til the
battery is fully charged.
Caution:
1. Charge the battery in an ambient temperature of 0 °C to 35 °C.
2. Use only the supplied power adapter to charge your tablet. Using unauthorized
power adapters may severely damage your tablet.
Note:
1. The battery is not fully charged when you unpack your tablet.
2.
A fully discharged battery takes about
3. When the battery is being charged, the LED indicator lights red, and when the
battery has been fully charged, the LED indicator lights orange.
4. The LED indicator will light 4-5 seconds later after the adapter has been
connected to the tablet and the wall outlet.
Step 2
Turning On/Off the Tablet
To t urn on the d evice, p ress a nd hold the Power button on the unit until y ou see the
boot-up screen. It may take a few minutes to start up the system.
To turn off the device, press and hold the Power button until you see the option "Power
Off", and then tap on "Power Off".
Tip: The device may fall asleep with the screen display locked when there is no touch action for a while. You
can briefly press the Power button to wake it up.
Step 3
Inserting/ Removing a micro SD Card
1. Pick up one micro SD card.
2. Align the micro SD card so that the pins are pointed toward the card slot.
3. Push the micro SD card into the card slot.
4. To remove the micro SD card, make sure the micro SD card is not working, and
enter the Setting menu to select ' Unmounting removable storage' before
removing from the slot.
All manuals and user guides at all-guides.com
Getting Started
4.5
hours to fully charge.
2
Publicité
