9.7" Capacitive Touch Android Tablet
a. Built-in speakers
b. Touch screen
c. Camera lens
d. Built-in microphone
e. Earphone Port – connect to stereo
earphones.
f. POWER-IN port - connect to power
supply through DC adaptor
g. Mini USB Port – to a computer through
USB cable.
STEP 1 Charge the Battery
Plug the DC adaptor to the POWER-IN port of the unit
and the standard 220V power socket to start charging. It
takes about 5 hours to fully charge the battery. The
charge indicator should light up in orange once the
battery is fully charged.
STEP 2 Transfer files
(1) Connect the device to computer with the supplied USB cable.
(2) Two new removable disk drives should appear on your computer standing for the internal
memory of the device and the memory card inside it.
(3) Copy files to the removable disk drive just as you would do to your hard drive.
(4) On your computer, left click the
click the pop-up message "Stop the USB Mass Storage Device – Drive (X)." to disconnect
the device from the computer safely.
Quick Start Guide
Accessories
USB Cable
Buttons & Ports
Step by Step to Get Started
DC Adaptor
h. Reset pin hole – reset your
i.
j.
k. Charge indicator
l.
m. Micro SD card slot
icon at the right bottom corner of the desktop and then
1
Pouch
device if it freezes.
VOL- - turn down the volume
VOL+ - turn up the volume
Power button – press and hold
to power on or off the unit; briefly
press to turn on or off the screen.
NEXT10P12
Ver.1.0