7" Capacitive Touch Android Tablet
a. VOL- - turn down the volume
b. VOL+ - turn up the volume
c. Power button – press and hold to
power on or off the unit; briefly
press to turn on or off the screen.
d. Earphone Port – connect to stereo
earphones.
e. Built-in speakers
f. Touch screen
g. Camera lens
STEP 1 Charge the Battery
Plug the DC adaptor to the POWER-IN port of the unit
and the standard 220V power socket to start charging.
It takes about 5 hours to fully charge the battery. The
charge indicator should light up in orange once the
battery is fully charged.
STEP 2 Transfer files
(1) Connect the device to computer with the supplied USB cable.
(2) Two new removable disk drives should appear on your computer standing for the internal
memory of the device and the memory card inside it.
(3) Copy files to the removable disk drive just as you would do to your hard drive.
(4) On your computer, left click the
click the pop-up message "Stop the USB Mass Storage Device – Drive (X)." to disconnect
the device from the computer safely.
Quick Start Guide
Accessories
USB Cable
Buttons & Ports
Step by Step to Get Started
DC Adaptor
h. Micro USB Port – connect to
a computer through USB cable.
i.
Charge indicator
j.
POWER-IN port - connect to
power supply through DC
adaptor
k. Micro SD card slot
l.
Reset pin hole/Built-in
microphone – reset your
device if it freezes.
icon at the right bottom corner of the desktop and then
1
Pouch
NEXT7P12
Ver.1.1