8" Capacitive Touch Android Tablet
A. VOL+ – Increase the volume.
B. VOL- – decrease the volume.
C. Power – Press and hold to turn on or off the unit;
briefly press to lock or unlock the screen.
D. Earphone socket – Connects to stereo
earphones.
E. DC-IN port – Connects to standard electric source
through the AC adaptor.
F. Micro USB Port – Connects to PC via USB cable;
connects to USB memory device, keyboard, or
mouse; connects to 3G dongle via USB host cable.
STEP 1 Charge the Battery
Plug the DC adaptor to the POWER-IN port of the unit
and the standard power socket to start charging. It takes
about 5 hours to fully charge the battery. The charge
indicator should light up in orange once the battery is fully
charged.
STEP 2 Transfer files
(1) Connect the device to computer with the supplied USB cable.
(2) Two new removable disk drives should appear on your computer standing for the internal
memory of the device and the memory card inside it.
(3) Copy files to the removable disk drive just as you would do to your hard drive.
(4) On your computer, left click the
click the pop-up message "Stop the USB Mass Storage Device – Drive (X)." to disconnect
the device from the computer safely.
Quick Start Guide
Accessories
USB Cable
Buttons & Ports
Step by Step to Get Started
DC Adaptor
G. Micro SD card slot
H. HDMI interface – Connects to
I.
J. Built-in webcam
K. Charging indicator– Lights
L. Rear camera lens
M. Built-in Speakers
icon at the right bottom corner of the desktop and then
1
Pouch
HD TV that supports HDMI
connection.
Built-in microphone
red during charging, and lights
orange as charging completes.
NX008HI
Ver.1.0