Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFEGUARDS
• Avoid contacting moving parts.
• This appliance has important markings
on the plug blade. Contact a qualified
technician to replace the plug with a
suitable one if damaged.
• Connect the appliance only to a power
outlet installed perfectly.
• Do not attempt to defeat any safety interlock
mechanisms.
• Keep hands and utensils, other than the
tamper provided, out of container while
blending to reduce the risk of severe injury
to persons or damage to the blender. The
cover must remain in place when using
the tamper through the cover opening. A
scraper may be used but must be used only
when the blender is not running.
• Blades are sharp. Handle carefully.
• Always operate blender with cover in place.
The use of attachments, including canning
jars, not recommended by the manufacturer
may cause a risk of injury to persons.
• Be careful if hot liquid is poured into the
blender as it can be ejected out of the
appliance due to a sudden steaming.
• Do not blend hot liquids.
Connect the appliance
Make sure that the mains voltage corresponds
with that indicated on the data plate on the
bottom of the appliance.
Connect the appliance only to a power outlet
installed perfectly.
If the plug and power outlet are incompatible,
have the power outlet replaced with a suitable
type by qualified staff.
SAVE THESE INSTRUCTIONS
This user's manual
This user's manual is an integral part of
the appliance and must be kept intact and
available to the user throughout its life cycle.
Manufacturer's liability
The manufacturer declines all liability for
damage undergone by persons and objects
due to:
• use of the appliance different from that
envisioned;
• user manual has not been read;
• tampering of individual parts of the
appliance;
• use of non-original spare parts;
• f a i l u r e t o c o m p l y w i t h s a f e t y
recommendations.
Identification plate
The identification plate lists the technical
data, serial number and brand name. The
identification plate must never be removed.
This appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
Flashing light indicates ready to operate. Avoid
any contact with blades or moveable parts.
EN - 5
Publicité
