Smeg BLC01 Instructions Importantes page 15

Cleaning and maintenance
Using the self-clean option (19)
• Introduce 200 ml of warm water and a few
drops of neutral detergent into the jug.
• Press the automatic cleaning program button
(19). The LED of the button lights up with
a fixed light, while the other buttons switch
off.
• The display shows the cycle duration time.
• Press the dial knob button to start the
program selected. The display shows
COUNT DOWN.
• The LED of the button selected remains on
with a fixed light during the activation cycle,
while the other buttons are off.
• The cycle ends automatically and the
blender goes into Stand-by. The display
shows the Stand-by icon (21) and the button
LEDs are off.
• To pause the program, press the dial knob
button. The count down flashes slowly and
the button of the program selected has a
fixed light. Press the dial knob button again
to resume processing.
• Press the button (19) to stop the program.
EN - 15