Hoover COMBI Serie Mode D'emploi page 47

All manuals and user guides at all-guides.com
REVERSING THE DOOR SWING
Dissemble the Refrigerator Door
1. a．Use a tool to remove the screw off the hinge cover, and then
remove the latter. Insert the communication line to the hole on
the cabinet top.
b． Use a tool to remove the 4 screws off the upper hinge cover
and then remove the latter.
Pry up the door bush and small end cap cover on the door.
d． Use a tool to remove the 2 screws as shows in the below
figure to remove the hole cover on the cabinet top and get the
cabinet communication line out of the hole.
Pry up the small end cap cover on the door and get out the
door bush and door communication line.
upward over 500mm to remove the door.
2. a． Use a tool to remove the 3 screws off the middle hinge
cover and then remove the middle hinge.
b． move the freezer door upward over 500mm to remove
the door.
c． Insert the door bush and door communication line into the
hole on the door and then put on the small end cap cover.
e． Insert the door bush into the round hole on the door and then
put on the small end cap cover.
f ． Move the refrigerator door
47