Hikmicro PANTHER 2.0 Serie Guide De Démarrage Rapide page 7

Steps
1. Turn off the device first. Align the screw holes on the device with those on the rail.
2. Insert the screws into the holes and tighten them securely.
3. Tighten the levers to secure the device.
Note:
The rail is not included in the package. Please purchase it separately.

Use lint-free cloth to clean the device base and the rail.

Zeroing
More Operations
8.
Scan the QR Code below to obtain the user manual for more operations.
Steps
1. Select in the menu, and press the wheel to
enter the reticle setting interface.
2. Select to select a reticle, and select
set the distance to the target.
3. Select to set the digital zoom ratio.
4. Aim at the target, and select
image.
5. Rotate the wheel to set the coordinates X or Y until
the big reticle aligns with the point of impact.
5
to
to freeze the