Bresser FREEK VONK 9820202 Mode D'emploi page 25

EN
7. Switching between front and rear lenses
In standby mode, press and hold the "UP" button to switch between the front and rear lenses.
8. Using frames
1. In standby mode, short press the "DOWN" button repeatedly to browse through the available frames.
The displayed frame is automatically selected.
2. Long press the "DOWN" button to exit the frame selection and return to the default setting.
NOTE: The frame selection does not work while the zoom setting is enabled. To use the zoom in combi-
nation with a frame, select the frame first and enable the zoom setting afterwards.
25