Bresser FREEK VONK 9820202 Mode D'emploi page 22

4. Printing paper
• The printing paper must be inserted in a specific direction. The glossy side must be facing up. If the paper
is inserted incorrectly, the photo will not be printed. Please check the paper direction if printing fails.
• Always pull out the printing paper about 2 cm past the paper exit. Also, make sure the paper is centred
and without deviation to either side, otherwise it might cause a paper jam in the camera.
• If printing is enabled and there is no printing paper inside the camera or it is inserted incorrectly, the
camera will display "No paper" after taking a photo.
• If the temperature of the camera is too high, it will stop printing and display "High temperature, no
print" on the screen. You will temporarily be unable to print. You can still take photos / videos and save
them on the memory card to print later.
• If the battery is low, the camera will stop printing and display "Low battery" on the screen. You will
temporarily be unable to print. You can still take photos / videos and save them on the memory card to
print later.
GET MORE PRINTING PAPER HERE:
www.bresser.de/P9820203
22