Télécharger Imprimer la page

Kortel Design KRUYER III Notice D'utilisation page 38

Publicité

Les langues disponibles

Les langues disponibles

Preparing your harness
First settings
Connectors :
This harness is fitted by default with flexible T-Bone links
connectors. Light and ultra-resistant (>2400DaN), they are
perfect for mountain use. To handle them, simply proceed as
described below (Steps 1 to 4).
You can also use lightweight aluminium carabiners.
Step 1
Step 3
More detailed information is available at www.korteldesign.com.
More detailed information is available at www.korteldesign.com.
Step 2
Step 4
38
According to the current state of knowledge on automatic Zicral
According to the current state of knowledge on automatic Zicral
carabiners, it is recommended to change them every 5 years or after 500
carabiners, it is recommended to change them every 5 years or after 500
hours of use.
hours of use.
We recommend the use of connectors with a resistance greater
We recommend the use of connectors with a resistance greater
than or equal to 2400daN.
than or equal to 2400daN.
Flexible connectors should not be used on straps wider than
Flexible connectors should not be used on straps wider than
25mm.
25mm.
After each manipulation of a carabiner, it is imperative to check
After each manipulation of a carabiner, it is imperative to check
that it is properly locked. If in doubt, repeat the operation.
that it is properly locked. If in doubt, repeat the operation.
KRUYER III

Publicité

loading