Costway FP10244US Mode D'emploi page 8

Use of detergent
Put the detergent powder into the tub
as the right figure.
Then close the wash lid.
We suggest use low sudsing
detergent powder.
How to use the washing powder
Dissolve in the machine directly
1. Low water level.
2. Add the washing powder, and run for 30 seconds to dissolve it
completely.
3. Put laundries in, select suitable water level.
The instant dissolving of the washing powder
1. Prepare warm water of 86°F(30°C) in a container.
2. Pour the powder while stirring to fully dissolve it.
The washing powder is more prone to pollute the laundries than the
detergent, therefore, please use it with proper quantity.
Washing powder with poor quality or not used for a long period may
get blocked, please clean the detergent box in time.
How to use bleach
Fill water to the selected level, dilute the bleach in the container,
and pour it slowly into the washing tub.
Do not use bleach for colored or figured laundries as they are prone
to lose colors.
Do not put bleach to laundries directly.
Refer to the manual for the usage and quantity of the bleach.
Please dissolve powder bleach before use.
For the quantity of the concentrated washing powder, please refer to
its manual.
Remarks: avoid splashing of water and waste of washing powder,
water level should not be too high if laundries are too small.
14
Control panel instruction
Mode and meaning of the indicator light
Child lock
When use the machine, press the buttons of "water level/spin" and
"program/delay" at the same time above 3 seconds to set child lock,
press the buttons of "water level/spin" and "program/delay" at the same
time above 3 seconds again to cancel the child lock.
At the beginning of start, press Water level/Spin to select water
level, you can select appropriate water level. According to your
laundries quantity. 1 is low water level, 2-3 is middle water
level, and 4-5 is high water level.
During wash (including rinse), if need to add water, press
Water level/Spin button to add water, un-press will stop adding.
Or pause the washing machine and press Water level/Spin to
select higher water level, then press Start/Pause button, the
washing machine will add the water to setting level
automatically and continue working. If your resetting water
level is lower than present water level, the lower water level
will valid in next water inlet.
At the power on initial status, long press the button "water
level/spin" above 3 seconds, the machine will run spin
function. When use the machine, the top door should be
closed. Otherwise, when the machine start to spin, the
machine will stop to run and error alarm.
15