Publicité
Les langues disponibles
Les langues disponibles
How to use drainpipe
1. The drainpipe must be hung during use, and the height is not more
than 4ft to avoid leakage or stop. If it drains for a long time, the machine
will stop running.
2. You can adjust the situation of the elbow bend pipe to change the
height of the drainpipe.
3. Do not extrude the drainpipe to ensue drain smoothly.
Water inlet installation
Tap selection
The front end should be longer than 0.4in. The tap exit end face should
be flat and smooth, if not file it to avoid leakage.
10
Connect the inlet hose with the washing machine
1. Do not take off the water absorption
cushion. Please check if the cushion is
dropped or damaged before each usage.
If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve
connector.
3. Fasten the inlet hose nut and swing it
gently to make sure if it is suitable.
Check the connection between inlet hose
connector and the tap
Preparation before operation
Preparation before washing
1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Confirm
the socket is earthed reliably and insert the
power plug. The earth terminal should not
link to gas pipeline, tap pipeline etc.
3. Put down the drainpipe.
Warning: the temperature of the water should less than
122 °F (50 °C)!
11
Publicité
