Monitor Audio VECTA Guide D'installation page 6

V-CORNER
Single V-CORNER mounts can be used to fit the loudspeakers vertically into the corner of the walls or
horizontally in the corner of a wall and ceiling. It is also strong enough to just mount one side of the
bracket to an open sided wall or post. Feed the cable through any one of the three through holes and
using bare wire clamp the cable in place in the sprung, push down terminals.
Wall Fixing Points.
3 on each side.
Use appropriate fixings
and screws for the wall it is
being fixed to.
NOTE: If the wall is a long
way off square, using one
side of the bracket to fix it
to the wall will still hold the
loudspeaker sufficiently.
Bracket Cover.
When secured to the wall,
slide this over the bracket
to hide cables and wall
fixings.
4
All manuals and user guides at all-guides.com
Vecta Installation Guide
Cable Through Hole.
Feed cable through and
around into terminals.
Loudspeaker Terminals.
Push down on the terminals
to clamp the cable in place.
Loudspeaker Mounting Arm.
The is the arm the
loudspeaker will sit on.
Loudspeaker Fixing Bolt.
Secured from below, this
fixes the loudspeaker to
the bracket. There is a
guide in the back of the
loudspeaker to help locate
the screwdriver in the bolt.
The bolt has a longer shaft
to aid installation.
Used to set the angle of
the loudspeaker and also
help grip it in place.
Teeth