Kantech Intevo Compact Guide D'installation Rapide page 11

All manuals and user guides at all-guides.com
3-
Locate the IntevoConfigTool.exe file on the USB key and launch
the application.
4-
To assign a new IP address, right-click on a MAC address and select
Assign IP address.
5-
Click the Launch Configuration Web Page button located on the
upper right side of the screen.
6-
Enter "admin" as an ID and password.
7-
Follow the steps in the Language Wizard.
8-
Launch Remote Desktop Access application with the address
entered in step 4.
Please refer to the User Manual for further information.
How to activate IP camera channels on INTEVO using
American Dynamics Illustra 400 or 600 series IP cameras:
1-
Install and log into your INTEVO unit
2-
Log into the AD IP Video (HDVR) software
3-
Go to Configurations / HDVR server / System setup.
4-
Take note of the MAC address of your INTEVO unit.
5-
Go to the Kantech web registration page by going to the address
below:
9