Seiko Epson TM-H6000II Manuel D'utilisation page 8

English
Inserting Slip Paper
Note:
Be sure that the slips are flat, without curls, folds, or wrinkles.
Troubleshooting
ERROR LED on or flashing.
❏ The print head temperature may be extremely high. Wait until
the print head cools and the printer resumes printing
automatically.
❏ Make sure that the roll paper and unit cover are properly
closed.
❏ Turn off the printer, and check for a paper jam.
❏ The autocutter may be jammed. See the description below.
❏ Turn off the power, wait several seconds, and then turn it on
again. If the error remains, contact your qualified service
person.
The autocutter is jammed or the roll paper cover will not open.
1. Turn off the printer, and open the unit cover.
8 TM-H6000II with Image Scanner User's Manual