Weller WXHAP 200 Mode D'emploi page 15

WXHAP 200
All manuals and user guides at all-guides.com
3 Scope of supply (Operating instructions)
WXHAP 200
T0052712099
R04 Ø 1,2 mm
R06 Ø 3,0 mm
Nozzle adaptor M6
4 Device description
The Weller WXHAP 200 Hot Air Tool with integrated finger switch (3)
is suitable for soldering and desoldering surface-mounted
components. A wide range of nozzles adds to the versatility of the
WXHAP 200 tool.
A push button (3) integrated in the handle is used to control the air
flow. The ionising circuit integrated in the tool ensures that hot air is
static free. The hose and handle are of antistatic design.
The hot air temperature can be set to between 50°C and 550°C
(100°F and 1000°F) using the control unit.
4.1 Technical data WXHAP 200
Heating output
Heating voltage
Max. air flow rate
Temperature range
Temperature accuracy
Potential balance
The WXHAP 200 hot air tool has an equipotential bonding conductor
which can be connected in accordance with the operating
instructions of the control unit in use.
WDH 30
T0051515299
200 W
24 V AC
15 l/min
50°C up to 550°C/100°F up to
1000°F
± 30°C/± 80°F
5-7