Publicité
Les langues disponibles
Les langues disponibles
Getting started
Remove your Television carefully
Please Note
from the box. You may wish to
When not in use disconnect the plug
store the packaging for future use.
from the mains power supply.
Press the Power button on
the front of the TV. The
j standby indicator will
illuminate.
Press a Numeric bution or the
Program up or Program down
button on the remote handset or
Program up or Program down
button:on the front panel to
sWitch the TV on.
The-standby indicator remains on.
The picture will appear after a
an aerial, plug the aerial lead
few seconds.
tial socket:on the rear of the
In the box
Inside your this package you should have:
¢ 'elevision
Press the Standby button to switch
the TV to standby. The standby:
indicator will brighter.
Please Note
Do not leave the television on standby
unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
"TV controls" and " Tuning the television".
'You can.use an outdoor or indoor aerial.
.
However, if you use an indoor aerial the
Batter y fitting
quality of the reception may be reduced —_ Insert the 2 AA Batteries supplied into the
and adjustment of the aerial may be
compartment on the rear of the remote
required when changing programs.
control, ensure you follow the polarity
diagram inside the compartment.
Please note
If you live in a poor reception area or use an
indoor aerial you-may experience loss or
corruption of teletext transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your domestic
mains socket outlet (230:°V 50 Hz:AC).
Publicité
