Heath Zenith Secure Home UT-9260-BZ Mode D'emploi page 12

Operation
Mode: On-Time:
Test
5 Sec
Auto
1, 5, or 20 min.
Manual Until Dawn*
* resets to Auto Mode at dawn.
Turn Range control to the desired
setting.
TEST MODE
Slide the ON-TIME switch to
TEST and turn the Range control
to the center of its adjustment.
AUTO MODE
Put the ON-TIME switch in the 1,
5, or 20 minute position.
Works: Day Night
x
RANGE
RANGE
MIN
RANGE
MAX
ON-TIME
MIN
TEST 1
ON TIME
TEST 1 5 20
Manual Mode only works at
x
x night because daylight returns
x the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
MAX
Manual Mode only works with
ON-TIME
the ON-TIME switch in the 1,
5, or 20 minute position.
TEST 1 5 20
5 20
MANUAL MODE
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time, the control will
be in the AUTO mode.
-12-
MANUAL MODE
TEST
Move ON-TIME Switch
to 1, 5, or 20 minutes
AUTO
1 Second OFF
then...
... back on.
Flip light switch
off for one second
then back on*
598-1342-01