CONCORD Eye-Q Go 2000 Mode D'emploi page 41

5. Transferring Files to the Computer
You can view and store the files you have captured with the camera using
your PC. To download the files for viewing, you must first install the
software that comes with your camera.
Connecting the Camera to the Computer:
1. Plug the rectangular end of the USB cable that is
included with the Concord Eye-Q Go 2000 into
your PC's USB port. (fig.5.1)
2. Open the Cable Connection panel on the Concord
Eye-Q Go 2000, by lifting the door and then
sliding the door out.
3. Plug the square end of the USB cable into the
USB connector located inside the Cable
Connection panel.
All manuals and user guides at all-guides.com
40
fig.5.1