Publicité
Les langues disponibles
Les langues disponibles
Installation
Installing the duct covers
When using both upper and lower vent covers, push the lower cover
down onto hood and lift the upper cover to the ceiling and install with two
mounting screws.
NOTE
For vented installations, the upper vent cover may be reversed to hide the
slots.
A
B
A. Upper vent cover
B. Lower vent cover
C. 4.2 x 8 mm screws
Range Hood Use
Range Hood Description
The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and
allow it to operate several minutes after cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the front
side.
C
D
C
D. Bracket
C
D
A
Secure the bottom of the duct with 2 - 4.2 x 8 mm screws.
Completing the Installation
1. Install the metal baffle filters. See the "Range Hood Care" section.
2. Check the operation of the range hood blower and light.
See the "Range Hood Use" section.
NOTE
To get the most efficient use from your new range hood, read the "Range
Hood Use" section.
B
A. Baffle filter
B. Baffle filter handle
C. Blower and light controls
D. LED lamps
English
9
Publicité
