LaserLiner EasyCross-Laser Green Mode D'emploi page 8

Completely read through the operating instructions,
the "Warranty and Additional Information" booklet as
!
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.These documents must be kept in a safe
place and passed on together with the product.
Intended use
This laser projects a green laser cross and is intended for
aligning horizontals, verticals and slopes. Optical signals
indicate when the unit is outside its self-levelling range.
The product has a 1/4" tripod connection.
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out
of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail, the battery charge is weak, or the housing has
been damaged.
Safety instructions
Using class 2 lasers
IEC 60825-1:2014, EN 60825-1:2014/A11:2021
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm