Télécharger Imprimer la page

HOMCOM C10-022V00 Instructions D'assemblage page 5

Publicité

Les langues disponibles

Les langues disponibles

EN
Before Installation:
1.Read these instructions carefully before installation.
2.Clean the roof and its rails before installation.
3.Using the vehicle with roof racks may cause a noticeable change in wind noise.
Load:
1. Check your vehicle's manual for maximum roof load capacity.
2. On road capacity: maximum roof load capacity - load carrier weight.
3. Off road capacity: on road capacity / 1.5.
4. Do not significantly exceed the load carrier's width. It should always be spread
out evenly across the carrier, with the centre of gravity being as low as possible.
5. Use specialised racks when carrying bikes, surfboards, kayaks, canoes, ski
boards, and snowboards.
6. When several surfboards are being carried, they should be placed on top of
each other – not beside each other.
7. When carrying long items such as kayaks, canoes, surfboards, ensure they are
secured at the front and the rear of the vehicle.
8. All loose or removable parts of the load should be taken off before loading.
9. Check the load is secure after a short distance and at suitable intervals. Tighten
the securing straps when necessary.
-5-

Publicité

loading