Publicité
Les langues disponibles
Les langues disponibles
EN
Install cross bar onto car roof
1.Place the rack onto your vehicle and adjust the its position.
2.Find the proper position and pull the red button up to fix. Clamp hook the door
edge, then tighten the locking screw.
Place the cover and lock it, then push the plastic end cap into the bar.
1. Points to Check after installation:
1) Check the tightness of the crossbar screws after installation.
2) Gently wiggle the crossbar to check for problems. Ensure there are no noises
when pushed and pulled.
If you encounter problems in step 1-2, repeat the installation instructions.
-4-
Publicité
