1 - DESCRIPTION OF THE APPLIANCE AND OF THE COMMANDS
1. Switch knob
2. Front grill
3. Halogen heating element
4. Reflector/radiator
6
2 - INSTALLATION
• The appliance does not require installation and must exclusively be used as a portable
device.
• After removing the packaging, check that the appliance is in perfect condition; in case
of doubts do not use it and refer to professionally qualified personnel.
• Assemble the body frame and the base plate together as the following sequences:
- ensure that the anti-topple switch (6) contacts go across the base raceway (5);
- fasten the body of the appliance to the base using the screws (7).
• Entirely straighten the power cord.
• Place the appliance in an appropriate environment and on a stable and flat surface.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
• Leave at least 1m of free space on the sides, behind the appliance and above it (fig. 1).
• Connect the plug to the power socket.
EN - 8
8
1
2
7
5. Base
6. Tip-over switch
7. Screw
8. Handle
1
4
3
5