OXO SOLANO PRO Mode D'emploi page 8

Right View
1=Ground;2=Data-;3=Data+
1. DMX IN
2. DMX OUT
3. MIDI IN Port
4. SMPTE IN Port
6. Operation Guide
Select Work Mode
There are 5 work modes available for Solano Pro:
- Manual control
- Real-time trigger
- Time code trigger
- External DMX trigger
- DMX monitor
The user may press the OK Button and keep hold it for 2 seconds, the Work Mode option menus
appears, now use Up/Down button to select the work mode, and press OK to confirm.
Set User Parameters
• When the Work Mode option menu appears, use Up/Down button to select «SET & MODIFY»,
press OK and input password «1234»(the default password was set as «1234»), the function
option menu appears.
• Record/modification of DMX data.
Record DMX
The user may use this function to record SCENE and SHOW, use the recorded SCENE to edit
CHASE.
User Instruction - SOLANO PRO
1=Ground; 2=Data-; 3=Data+
1. 2. 3=NC;4=V+;5=Signal
Inputs the external DMX signal.
Outputs the DMX signal.
Inputs MIDI time
Inputs SMPTE time
V1.3 11/2021 8/28