OXO SOLANO PRO Mode D'emploi page 13

• Set DMX Start Address
This recorder receives three channels DMX data, the operation instructions detailed as below.
DMX Channel
Starting Channel
Starting Channel
+1
Starting Channel
+2
• No DMX IN
This function is used to set Manual/Timer to trigger event while there is no DMX input in the
work mode of DMX Trigger or DMX Monitor.
• No SMPTE/MIDI IN
This function is used to set Manual/Timer to trigger event while there is no external time input
in the work mode of SMPTE/MIDI Trigger or DMX Monitor.
• Assign Memory
• Select Assign Memory
• Select Memory( May select from Memory1 to Memory8)
• Select Assign Type( Scene, Chase and Show are available for option)
xxx/yyy
xxx, the current Type serial number
yyy, the total available Type quantity
• «Assign» is used to assign the specified contents.
• «Master» is used to set the Master value for the current memory.
• Select «Scene» may set FadeTime for it.When select Chase or Show, may set the Speed
Scale of playback.
User Instruction - SOLANO PRO
DMX Values
0 ~3, Trigger Memory 1;
4~7, Trigger 2;
9~11, Trigger 3;
........
28~31, Trigger ;
Above 31, the Memory unchanged.
0~79 , Pause;
80~159 , Play;
Above 159 , Stop.
0~127 , Normal Output,
Above 127, Blackout.
V1.3 11/2021 13/28