Publicité
Les langues disponibles
Les langues disponibles
Water tank
If the collection bin is full or not correctly placed the product will not work. You must take out the
water tank, empty it and put it back correctly before the product will work again.
C.
1. Hold the water tank with two hands. Gently pull out the water tank as shown in figure C.
2. Hold the water tank by the handle and gently empty the water tank as shown in figure D.
3. Replace the water tank as shown in figure E. The product will automatically resume
operation.
Audible signal
When the collection tray is full of water, the product will stop working and emit an audible signal.
The audible signal will be audible for 20 seconds after you remove the collection tray from the
product.
How to use
1.
Make sure the water tank is empty and properly placed.
2. Plug in the power cord.
3. Touch the power button to turn on the product.
4. Select the desired mode by touching the mode button (repeatedly).
5. Touch the power button to turn the product off.
28
D.
E.
Setting the timer
You can use the timer function in 2 different ways. When the time expires, the timer light indi-
cates the remaining time.
Turning off automatically
1.
Turn on the product by touching the power button.
2. Make sure that the timer function has not been set before. If
timer function has already been set.
3. Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will automatically turn off.
Delayed start time
1.
Make sure the product is turned off.
2. Make sure that the timer function has not been previously set. If
the timer function has already been set.
3. Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will turn on automatically.
Touch the timer button to deactivate the timer function.
Drain hose
In general, the water is collected in the water tank. If you want continuous water drainage, you
need to follow the following steps to get the situation as shown in figure F.
1.
Unplug the power cord.
2. Remove the water tank.
3. Insert the drain hose into the drain hose
opening. Always make sure the hose runs
down and is not blocked or kinked.
4. Make sure the hose is in a container or
something similar to catch the water.
English
is visible on the display, the
is visible on the display,
F.
29
Publicité
