Megasat Shipman Kompakt Mode D'emploi page 18

9. Mounting on the roof
Before installation make sure that all required parts and tools are available!
4
1 5
6
8
7
2 3
11
NOTE: The following items are not be included:
Insulating tape, drill bits, special glue, power drill, cleaning cloth
1
Clean the surface and the mounting feeds with
cleaner.
3
Affix the tape at a distance of 4 mm to the moun-
ting plate.
ENGLISH
14
All manuals and user guides at all-guides.com
1. Cable to set-top box (1m)
2. Cable to antenna (12 m)
3. Power cable
4. Special adhesive
9
5. 11x M4 x 20 / 2x M4 x 25
6. Cable gland
10
7. Roof outlet
8. Masking tape
9. 2 mm / 15 mm drill bits
10. Drilling machine
11. Cleaning cloth
2
driving direction
Place the antenna to the desired position on the
roof of the vehicle.
4
Place the antenna to the side and distribute the
special glue serpentine within the bordered area.
9. Mounting on the roof
5
Put back the mounting plate on the silicone
applied and make 2 holes (2mm) with power drill.
7
Assemble M4 x 20 screws.
9
Seal with special glue the edge of the mounting
plates.
11
Remove friction tape and get dry.
ENGLISH
6
Apply silicone on the holes.
8
Cover now the screw heads with the special glue.
10
Smooth the glue joint.
12
The final result should look like in this picture.
15