HoMedics MCS-610H-CA Manuel D'instructions page 8

NOTE: When
"POWER" button
is pressed for
first-time use, the
moving mechanism
will automatically
move to the
lowest position
before starting a
massage program.
After initial use,
mechanism will
always park at
lowest position.
See note below
regarding parking.
NOTE: The moving
massage mechanism
always "parks"
or finishes in its
lowest position. It
will continue to this
position after the
power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
"park" or move to
its lowest position.
All manuals and user guides at all-guides.com
Demo Button
For a brief demonstration of the features of the Triple
Shiatsu Massage Cushion, press the DEMO button. The
L.E.D light will blink to indicate the active functions.
The unit will briefly go through each function. Once
complete, the unit automatically turns off.
3D Kneading Massage
Dynamic 3D massage mechanism
kneads side-to-side, up-and-down and
in-and-out for maximum relaxation
Massage Intensity
Choose the strength of your massage
experience. Toggle through two
massage intensities: Low and High. To
select an intensity, simply press the Low
or High button. To change the intensity,
press the adjacent button.
Heat Button
For soothing heat when massage is
on, simply press the heat button and
the corresponding red L.E.D light will
illuminate. To deselect, press the
button again and the corresponding
L.E.D light will turn off. For your safety,
heat cannot be turned on if no massage
program is selected.
8