Controlling the TV with the Supplied Remote
You can control the sound level, input source, and
power switch of your TV with the supplied remote.
TV @ / 1
TV
TV/VIDEO
TV CH +/-
TV VOL +/-
Controlling the TV
You can control your TV using the buttons below.
By pressing
You can
TV @ / 1
Turn the TV on or off.
TV/VIDEO
Switch the TV's input source
between the TV and other input
sources.
TV CH +/-
Scans up or down through
memorized channels.
TV VOL +/-
Adjust the volume of the TV.
Using the number buttons for controlling the
TV
When you set the remote to the TV mode, you can use
the number buttons for controlling the TV.
Press the TV buttons
The TV button turns red and the remote is set to the TV
mode. You can select the TV channels by using the
number buttons.
>10 is for selecting the channel number greater than 10.
To cancel the TV mode, press the TV button again.
Notes
Before adjusting the TV, press TV.
The TV button turns off when you do not operate the
remote for 10 seconds.
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
Tip
Depending on the TV manufacture, the following method
works. For double-digit number, press -/-- first and then
number. (For example, for channel 25, press -/--, then 2
and 5.)
33