Cisco Linksys WET610N Guide D'installation Rapide page 9

WET610N
R.
The Bridge is connected to your
router with a network cable .
Disconnect this network cable
from your router .
If you need to move the device
that you want to equip with
wireless, then do so now . Click
Next .
S.
Connect the free end of the
network cable to the device that
you want to equip with wireless .
If you need to move the Bridge,
then make sure you take the
power adapter and network
cable with you .
Click Next .
T.
Wait until the Power and
Ethernet LEDs are solidly lit, and
the Wireless LED is flashing .
Click Next .
U.
The wireless settings are
displayed .
To save the settings in a text
file on your desktop, keep the
default, Save these settings in
a text file on my desktop .
Click Next .
Wireless-N Ethernet Bridge with Dual-Band
All manuals and user guides at all-guides.com English
9