Cisco Linksys WET610N Guide D'installation Rapide page 7

WET610N
L.
The Setup Wizard displays
the Network Name of the
wireless network with the
strongest signal . To connect to
this network, click Next . Then
proceed to step P .
To connect to a different
network, select I don't want to
connect to this network, and
click Next .
M.
The available networks are
listed in the table . Select your
network, and then click Next .
(If your router supports Wi-Fi
Protected Setup, which is
indicated by the
to the network name, then
proceed to the section, "Wi-Fi
Protected Setup" . )
If your network is not listed, select My network is not in this list, and
click Next . Proceed to step O .
N.
If your network does not use
wireless security, proceed to
step P .
If your network uses wireless
security, enter the security key
of your wireless network . Click
Next . Then proceed to step P .
Wireless-N Ethernet Bridge with Dual-Band
All manuals and user guides at all-guides.com
icon next
English
7