Alpina GLA-1006 Manuel D'utilisation page 11

2. Completely unwind the connecting cable and plug the mains plug into a
plug socket.
3. Open the door.
4. Slide the fat collecting tray into the bottom of the cooking space.
5. Select a suitable accessory for the food that is to be prepared (see the
"Accessories" chapter). You can also use a small casserole or baking
dish and place it on a baking rack.
6. Process the food and place it on / in the accessory.
7. Attach this accessory in the device (see the "Accessories" chapter).
8. Close the door.
9. Press the
185 °C and 15 minutes are preset.
10. Either set the temperature and cooking time manually with the buttons
+ / - and start the cooking process by pressing the
select one of the 10 programs.
Choose a program:
Touch the required program symbol. When it flashes, the program is activated
and the device will turn on a few seconds later. As long as the symbol is flashing,
a program change is possible. With the
can be started immediately. The symbols represent the following pre-setting's:
Symbol Program
Chips
Steaks / cutlets
Fish
Shrimps
Pizza
Chicken
Baking
Rotary grilling
Drying
Heat up
The temperatures and cooking times which are set for the programs are
merely averages and should be adjusted if necessary. As the ingredients differ
due to their origin, size, shape and quality, the actual cooking temperatures
On / Off button. The displays on the control panel switch on.
Temperature
200 °C
175 °C
165 °C
160 °C
180 °C
185 °C
160 °C
190 °C
30 °C
115 °C
On / Off button, the cooking process
11
On / Off button or
Cooking time
15 min
25 min
15 min
12 min
15 min
40 min
30 min
30 min
2 hours
12 min