PRO-POINT 8436776 Mode D'emploi page 11

V 2.0
MAINTENANCE
WARNING! Do not service, clean, or maintain the tile saw without first turning off the motor and unplugging the tile saw
from its power source. Failure to do so may result in a serious injury to the operator.
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will prevent unnecessary
problems.
2. Always store the electrical cord underneath the saw after use.
3. Inspect the tool components periodically. Have damaged or worn components repaired or replaced by an
authorized technician.
4. Maintain the tool's label and nameplate. These carry important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
CAUTION! Only qualified service personnel should repair the tool.
LUBRICATION
Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not be suitable
and may damage the tool or cause a malfunction during use.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust. Remove the
lubricant before using the tool again.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
For technical questions call: 1-800-665-8685
All manuals and user guides at all-guides.com
7 in. Portable Tile Saw 8436776
11