CARE AND CLEANING
The wire whip is not dishwasher
safe. Clean it throughly in hot, sudsy
3
water and rinse completely before
drying. Do not store the wire whip
on the shaft.
TROUBLESHOOTING
If your Stand Mixer should malfunction
or fail to operate, please check the
following:
1. The Stand Mixer may warm up
during use. Under heavy loads
with extended mixing time periods,
you may not be able to comfortably
touch the top of the unit. This
is normal.
18 | TROUBLESHOOTING
All manuals and user guides at all-guides.com
2. The Stand Mixer may emit a pungent
3. If the flat beater hits the bowl, stop the
4. Is the Stand Mixer plugged in?
5. Is the fuse in the circuit to the Stand
6. Turn off the Stand Mixer for
If the problem cannot be corrected:
See the "Warranty and service" section.
Do not return the Stand Mixer to the
retailer; retailers do not provide service.
odor, especially when new. This is
common with electric motors.
Stand Mixer. See the "Assembling the
Stand Mixer" section and adjust the
beater to bowl clearance.
Mixer in working order? If you have
a circuit breaker box, be sure the circuit
is closed.
10-15 seconds, then turn it back
on. If the Stand Mixer still does not
start, allow it to cool for 30 minutes
before turning it back on.