Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
3.I CHANGING WEDGES SIZE
Repeat procedure of Figure 3-21, then remove the cartridge and insert another cartridge of a different color. Thanks to the cartridge
system, no need to adjust anything nor change any head.
Then turn back OFF the loading button.
3.J SETTING THE SHOOTING POSITIONS
After performing the adjustments of chapter 3 (ADJUSTMENTS). Perform the following procedure:
Put on the table only
one
chop
of
moulding against the
fence as per picture.
This will allow easy
visualization
of
stapling positions
Rotate the joystick to
be able to move to
the inside shooting
position. Once the
desired position is
reached, release the
joystick.
Move the stop to the
joystick assy until it
hits the aluminum
support
of
the
joystick.
Lock the handle of
the stop. This will set
your extreme inside
position.
All manuals and user guides at all-guides.com
Rotate
clamping button in
the ON position.
Figure 3-23
Unlock
position handle.
Figure 3-25
Figure 3-27
the
pre-
the
stop
CS200 CART
Figure 3-24
Figure 3-26
17
Publicité
