Dell 10KWOLHVUS Démarrer page 24

Starting the UPS
To start up the UPS:
Verify that the internal batteries are connected.
1
If an optional EBM is installed, verify that the EBM is connected to the UPS. Refer to the Dell
2
Online Rack EBM 10 kW Getting Started Guide for more information.
Verify that all load segment circuit breakers are in the ON position.
3
Switch the main utility breaker on.
4
The UPS LCD panel display illuminates. The Dell startup screen changes to the UPS status
summary screen. The UPS front panel display shows the flashing Standby icon
Press the On/Off button on the UPS front panel.
5
After the startup is complete, the status changes according to the UPS operating mode.
|
22
Installation and Startup
All manuals and user guides at all-guides.com
On/Off Button
.