Replacing the Battery Retaining Brackets
NOTE:
The battery retaining brackets are labeled L (Left) and R (Right) to indicate where they must be installed.
Replace the left (L)and right (R) battery retaining brackets:
11
For the first battery retaining bracket, insert the bracket tab into the channel on the side of the
center post. Fit the connected battery cables snugly behind the retaining bracket.
Align the end of the battery retaining bracket with the channel on the side of the chassis. Push the
bracket until it is firmly seated into the side channel.
Turn the thumbscrew clockwise to secure the bracket.
Repeat to replace the second battery retaining bracket.
Installing the UPS Front Cover
Remove the front cover from the accessory box.
12
All manuals and user guides at all-guides.com
Center Post Side Channel
Chassis Side Channel
Installation and Startup
|
15