Care & Cleaning - Toto Gyrostream TS110J1 Manuel D'installation Et D'utilisation

4) Install the bodyspray assembly by
pushing it firmly into the adapter
until it touches the finished wall
surface, making sure that the screw
holes are at 12, 3, 6, 9 o'clock and
the portion with two notches is at
12 o'clock.
5) Secure the bodyspray assembly to
the adapter with the four screws.
7) Align the tab on the top of the back of
the faceplate with the top notch on the
bodyspray assembly. Push in towards wall and
turn the faceplate clockwise until it locks in
place.
Secure the faceplate with the included set
screw using 2mm hex wrench.
Your new bodyspray is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
Installing the Bodyspray (continued)
Screws
CARE & CLEANING
Faceplate
Set Screw
2mm
Hex Wrench
5