Orbegozo PWS 1846 Manuel D'instructions page 9

PWS 1846
potential of electrical hazard.
 This product is only designed for use in living areas (and
is not suitable for places constantly exposed to humidity).
 Do not place the fan near flames, cookers or heaters.
 Do not obstruct the air flow.
DESCRIPTION
A. Speed control knob (back side)
B. Security grill
C. Metallic blade
D. Upper support
E. Height adjustment screw
F. Tube
G. Embellisher's base
H. Base
ASSEMBLY INSTRUCTIONS
Carefully unpack the contents of this carton
Fan base and tube assembly
To assemble the tube on the base, screw the bottom side of the tube to the base with the 4 supplied
screws. Unscrew the height adjustment screw and introduce the base embellisher throw the tube, as the
picture shows.
Assembling the fan and the support bar
To connect the tube to the fan's head, place the upper support in top side of the tube. Match upper
support holes with the tube's hole, put the screw in the holes and screw them with their nuts.
OPERATING INSTRUCTIONS
 Step 1: Set the fan base on a dry, level surface.
 Step 2: Please make sure the ON/Speed knob is in the off position. Plug cord into any standard AC
outlet.
 Step 3: The speed is adjusted by moving the knob left or right to the desired setting (0-Off; 1-Low; 2-
Medium; 3-High)
9