Publicité
Technical Data
Tank Capacity:
Spraying Distance (pressure dependent):
Hose Length:
Lance Length:
Dimensions:
Weight:
Max. permissible Operating Temperature:
Permissible Working Pressure:
Troubleshooting
Problem
The pump does not
built up pressure
Pressure sprayer does
not spray although
there is sufficient
pressure or only with a
weak spray jet
Handle cannot be
unscrewed
Push button does not
returns back in place
after releasing
Possible Cause
Safety valve (2) is loose
Hose connections are
not tight
Push Button (7) is
locked
Nozzle (11) is blocked Unscrew nozzle and
Suction hose (8) is
blocked
Strainer (12) is blocked Unscrew strainer and
Tank pressure is too
high
Push button spring
(6) is defective
14
5 l
Up to approx. 1.60 m
130 cm
40 – 70 cm
Ø 18 x 40 cm
990 g
40° C
3 bar
Solution
Tighten the safety valve
Tighten the hose
connections
Unlock push button
clean
Clean suction hose
clean
Release the pressure
inside the tank by lifting
up the safety valve (2)
Replace the push button
spring
Publicité
