Publicité
7. If the push button (7) is locked, first pull the push
button back to unlock it. Now push down the
button to spray the liquid.
If desired the push button can be locked in place
for continuous spraying.
First press the button down and then push it
forwards up to the end to lock the button in place.
Now the push button is locked and you do not
need to hold the push button for spraying.
8. For adjusting the nozzle (11), turn the nozzle
clockwise resp. counter clockwise, depending on the
desired spray pattern.
9. After work, lift up the safety valve (2) to release the
pressure inside the pressure sprayer.
Hints:
▪ Check the pressure sprayer before each use visually for any damages and do
not use the unit if obvious defects exist.
▪ Do not leave the pressure sprayer unattended for long time when full and
under pressure.
Cleaning and Storing
▪ After each use clean the sprayer and all components with clear water and
mild detergent. By doing this you will avoid chemical reactions by using
different fluids.
▪ Fill the tank with clear water and operate the sprayer until clear water is
coming out from the nozzle. Do not use aggressive chemicals or abrasives to
clean the unit.
▪ Always store the sprayer in a dry and frost-free room. Remaining water in
the unit can cause damages.
▪ Leave the pressure sprayer open when storing.
▪ Do not dispose of residual liquids in the sewerage system.
▪ Do not disassemble it and do not attempt to repair it yourself. In case of
questions or problems, please contact our customer support department.
13
unlocked
locked
Publicité
