Publicité
Before first Use
Take the sprayer out of the packaging and remove all packaging materials.
Store them in a safe place or dispose of them carefully; the plastic bags might
become deadly toys for small children.
According to factory-made functional tests, residual humidity can remain in the
unit. Residual humidity in a new article is not a fault.
Operation
1. To fill the tank, unscrew the handle (1) and remove
it. Before first use, test the pressure sprayer with
clear water.
2. Mix concentrates in a separate measuring cup prior
to fill into the tank. Add the necessary amount of
water and make sure not to overfill the tank. Be
careful while mixing, pouring and handling chemicals. The tank capacity is 5
litres.
Make sure the mixture is completely dissolved and there are no dirt
particles or clumps. If so, the suction tube (8) and the nozzle (11) and the
strainer (12) inside the tank might become blocked.
3. Before operating the sprayer, make sure the handle (1) is securely screwed
on.
4. Assemble the lance and the extension together. First adjust the length of
the lance according to application and then
re-tighten both parts together by using the
screw cap.
5. Unlock the handle by turning counter
clockwise and lift up. Start pumping with the
handle until you feel resistance.
6. Lock the handle in place and hold the pressure sprayer while spraying by the
handle or put the shoulder belt (3) on your shoulder.
OPERATION
12
Publicité
